Project notes

Black or white ceiling tiles: planning the finish

Choose a ceiling colour in the context of lighting, room use and future maintenance. Request a sample and review the tile, visible grid and perimeter trims together under the planned lighting.

Selecting sealants for a fire-rated system

Use the documented fire-stopping detail for the actual opening or joint. A sealant label alone does not establish that an entire penetration arrangement matches the project’s required evidence.

Polyurethane and acrylic sealants: selection questions

Start with the joint and the surfaces it connects, then compare sealant datasheets. Ask the manufacturer to confirm compatibility, movement requirements and the proposed finish before treating two cartridges as interchangeable.

Choosing a Pink Batts R-value for your project

Use the project’s energy assessment and construction details to brief a Pink Batts order. The product’s listed R-value is one selection field; dimensions, available space and the specified location also need checking.

Roof insulation: comparing forms and coverage

Sketch the proposed roof and ceiling arrangement before comparing batts, blankets, boards or other insulation forms. Record where each layer belongs and ask how the specified products fit around the actual structure.

Sarking duty ratings: what to check

When comparing sarking duty ratings, record how the product will be handled and supported during the build. Ask for the current datasheet so duty, installation conditions and moisture-related properties are considered together.

Comparing Autex acoustic product options

Compare Autex options using the current product datasheets and the purpose of the room. Make colour and pattern decisions alongside the required mounting arrangement, coverage and cleaning expectations.

Thermal breaks: questions for your wall-system designer

A thermal-break detail should be coordinated with the framing and external wall system. Ask the designer which interfaces need attention and record the specified product instead of choosing a strip by thickness alone.

Planning quieter zones in an open office

Describe the office noise problem before selecting a panel. A conversation travelling across desks, an echo within a room and noise passing through a partition need different questions in the acoustic brief.

Choosing a Level 4 or Level 5 plasterboard finish

Agree the surface finish before sheets are installed. Level 5 adds surface treatment beyond standard joint finishing; lighting, paint sheen and the intended appearance should be considered with the plasterer and painter together.